Videos

Hopefully this video will save you a call-out charge from your local electrician in Cleckheaton, Bradford.

Most RCDs operate into the off position but this RCD is a little different and I have often received calls regarding this issue.

If the MEM Mermera 2000 RCD operates if you have a fault on your electrics it drops into the tripped position, you will need to click the switch into the off position then to the on position. Hard to explain in text so please watch the video.

In part two I am installing a the conduit, sockets and lights to a new Pre-fab garage.

If you haven't seen part 1 already you can find it here.

What did it involve?

Using white plastic conduit, I installed metal clad sockets, switches and light fittings. Wired in twin and earth for this job.

Everything turned out great and I was really really happy with the outcome, plus the customer left me a cracking review!

How long does it take me to chop out a socket box for a double socket?

Am I slow, average or fast?

I've skipped the set-up for the kit as that would take quite a while!

I usually use 35mm back box's just to future proof an installation for flat plate accessories, and when using the chasing machine there isn't much difference between the two.

I use a 70mm Chisel in the SDS drill which is perfect coupled with the extra hand attachment which I love and use ALOT!

Does your house need new sockets??

Call me on 01274 358444

In this video I am installing a new Power supply to a new Pre-fab garage. Part two will be the sockets, conduit and lighting installation!

What did it involve?

We installed a new power supply from an existing fuse board, clipped externally using some super linian fire clips.

We added a new fuse-board ready for part two of the installation.

As usual, we used our go-to Hager fuse-board, this was another job I absolutely loved, and I was very happy with the outcome. My client even boarded the garage for me!

This is day 3 on a partial rewire at the property in Pudsey.

Call Nathan on 01274 358 444 for more information.

A full install of garage electrics.

Quite a bit going on with this one, and tried to keep the video as short as possible.

The existing supply was already in the garage, which was supplied by a metal conduit and single insulated cables. I pre-tested this and checked the bonding on a visit a couple of days before just so that I knew all was ok.

The conduit for the new consumer unit was a little tricky to get right, but once that was in we were ready for the main install.